460 7.5L starting problem

Discussion in '1980 - 1986 Ford F150, F250 and F350 Truck Forum' started by Sawyerball97, May 3, 2020.

< Previous Thread | Next Thread >

  1. Sawyerball97

    I just replaced the alternator in my f350 and now I have no power i got the alternator bench tested and its good and I got the battery tested and ended up replacing it. I also replaced my starter, and starter solenoid and I have new batter terminals. What else could be causing this
     
    Sawyerball97, May 3, 2020
    #1
    Tags:

  2. sim559

    no power Where? When you turn the switch on , does the dash light up? My guess is the ignition switch. There is a way to bridge the solenoid in the engine compartment using an end wrench
     
    sim559, May 3, 2020
    #2

  3. sim559

    no power WHERE? When you turn the ignition on , does the dash light up? Could be the switch. You can bridge the selonid in the engine compartment with a N wrench to engerize the starter. Make sure it is in nutral
     
    sim559, May 3, 2020
    #3

  4. Sawyerball97

    I did that and the starter cranked. Thank you
     
    Sawyerball97, May 3, 2020
    #4

  5. sim559

    so the starter is good My guess is the ignition switch
     
    sim559, May 4, 2020
    #5

  6. sim559

    so the starter is good My guess is the ignition switch
     
    sim559, May 4, 2020
    #6
< Previous Thread | Next Thread >
Loading...
Similar Threads - starting problem Forum Date
Trouble starting after a long drive and engine is hot. 1980 - 1986 Ford F150, F250 and F350 Truck Forum Oct 6, 2020
1980 F-350 Fuel/Gauge Problem 1980 - 1986 Ford F150, F250 and F350 Truck Forum Apr 25, 2023
1980 F350 Electrical Problem 1980 - 1986 Ford F150, F250 and F350 Truck Forum Dec 21, 2017
Loading...