Disc Brake Conversion

Discussion in '1961 - 1966 Ford F100, F250 and F350 Truck Forum' started by Dan, Jun 11, 2018.

< Previous Thread | Next Thread >
  1. Dan

    I am looking at putting disc brakes on my 65 F100, Any good or bad products out there? I have seen many different options out there, Just curious what other people have experienced. Thanks for the advice.
     
    Tags:
  2. FTZ HAIC Staff Member Oregon Chapter Founding Member

    No need to buy aftermarket. You can swap in front disc brakes from a 73-79. The rear brakes, while they can be swapped to discs, in my experience with my 67 F100 a front disc/rear drum setup worked very well.

    Grap the entire front i-beam and disc spindle setup from the donor truck. If you don't swap the i-beams as well, you might run into an issue with different king pin sizes on some 73-79 setups. Also, grab the master cylinder, brake booster, brake lines (though I recommend replacing them because you don't know how old the donor lines are), and the steering linkage (didn't have to do this myself, but I've heard there are some differences in some parts)
     
    Bertha66 likes this.
  3. Muel Article Contributor Oregon Chapter

    Don't forget the correct Master Cylinder and Proportion valve (aka: metering Valve or Block)
     
  4. dustybumpers Article Contributor Founding Member

  5. Dan


    Thanks for the advice, I will look into that. I appreciate it.
     
  6. FTZ HAIC Staff Member Oregon Chapter Founding Member

    Forgot to mention, when I said brake lines I didn't mean the steal lines, only the hoses which connect to the wheel spindles. :)
     
< Previous Thread | Next Thread >
Loading...
Similar Threads - Disc Brake Conversion Forum Date
65 F250 Disc Brake Conversion 1961 - 1966 Ford F100, F250 and F350 Truck Forum Oct 17, 2022
Power Disc Brake Conversion 1961 - 1966 Ford F100, F250 and F350 Truck Forum Sep 14, 2018
Disc Brakes on 1965 F-250 1961 - 1966 Ford F100, F250 and F350 Truck Forum May 3, 2022
Loading...
virtuoso