If you have a no start or stall issue, do some research before throwing a Fuel pump at it.

 

You may need this kit. #ad
#ad

 

To solve this
#ad
melted fuel pump relay fuse holder!

 

Just did one today. Customers complaint.... stalling, then no start. Pulled codes, fuel pump module codes. ..and all 8 injector codes. Identifix shows a tsb for this. Dead on the money.
So do proper testing and research before throwing parts. .....

 

Watch this cut..... that arrow is misleading.
#ad
my red marks show the proper wire to cut.both are the same color, different gauge. Full detailed instructions come with the kit.
That was the only confusing part I could find. A few unneeded steps, but decent information.

 

Replace this. .. #ad
with this. #ad
much better designed fuse.

 

Nice write up John!

 

You are a great tech guy John and don't even have a towel on your head...lol